MetersBoard A product of Enercon Digital
Utility tier · Enterprise MDM platform

See every unit.
Bill every unit.

An open meter data management platform that cuts AT&C losses and recovers distribution revenue. It reads every meter on the network, models the network those readings came from, and turns the gap between the two into a ranked list of places to send a crew.

Book a Demo Watch the two-minute tour
15min Load-profile interval Basis Platform configuration; 90 days of interval history held online.
8 Levels from the utility to one meter Basis The network model, configured to match how a utility is actually organised.
0 Head-end systems required Basis Communicates with meters directly or through a gateway and HES equally well.
The problem

You cannot reduce a loss you cannot see

Below the grid station most distribution networks are dark. Losses are reported monthly, in aggregate, long after the energy has gone — and what cannot be pinpointed gets recovered from the consumers who do pay.

World average ~10%
India 15.0%
Pakistan 17.55%
Sub-Saharan Africa ~18%

Source Transmission and distribution losses, most recent reported year. Power Finance Corporation / Ministry of Power (India, FY25); NEPRA State of Industry Report (Pakistan, FY2024-25); World Bank and IEA estimates.

What the platform is for
  • See Every meter read, validated and placed in the network it came from.
  • Locate Energy in against everything billed downstream, computed at the feeder.
  • Recover Not a dashboard. A ranked list of places to send a crew.
Operations

The whole network on one screen

Meters online, readings collected, commands dispatched, live alarms and network losses — the state of the fleet without opening a report.

4signals Energy balance, pattern break, tamper events, load mismatch — cross-checked continuously. 1sec Shortest supported read interval on the time-series store.
A live instance loaded with a representative network. Select to enlarge.

Five things it does that others charge extra for

Included
01 Real-time AT&C loss and theft detection Energy input at feeder and transformer level compared against billed units, computed as it happens rather than at month-end reconciliation.
02 Direct-to-meter ready Communicates with meters directly or through gateways and a head-end system equally well. Neither is required.
03 Multi-vendor meter and HES support Open architecture avoids vendor and technology lock-in — MQTT, HTTP, CoAP and OPC-UA, for fleets procured in phases.
04 Data localisation and security compliance Hosting and access control matched to your own data governance rules, given the sensitivity of revenue-critical data.
05 Built-in meters GIS Every meter mapped to its precise location and network hierarchy — feeder to transformer to consumer.
Also from Enercon Digital

Smart47 — reach the meters you already own

Replacing conventional meters is the slowest and most expensive part of any AMI programme. Smart47 is a clip-on retrofit device from the same team: under ten minutes to install, up to 60% cheaper than a new AMI meter, and it reports straight into MetersBoard with no head-end system in between. Ask about it when you book a demo.

Enercon Digital

Connect. Control. Save.

A product of Enercon Digital

Built by the people who build the meters

Enercon Digital builds metering hardware, control devices and the platforms they report into — energy intelligence for buildings and for the grid, designed and engineered in Lahore. MetersBoard is the grid half of that: the same team owns the circuit, the firmware, the ingestion pipeline and the dashboard, which is why the platform does not need a head-end system standing between it and a meter.

enercon.digital →

Where to go next

Three routes
01 Three clicks from a circle to a named feeder Step through the drill-down, and estimate what a point of loss is worth on your own network. Loss analysis 02 Everything under the dashboard Architecture, data and analytics, billing determinants, assets and compliance. Platform 03 Runs where your rules say it has to Public cloud, private cloud, company intranet or full on-premise. Deployment

See it running on a live instance

Thirty minutes, no slides — the platform walked with your own network structure in front of you.

Book a Demo